|
Water Conservation
Water
conservation is an important subject. Everyone thinks about water
conservation when there is a drought or water shortage, but there are
many simple things you can do to help save water everyday. Our
drinking water comes from wells located on Highridge Drive. The
wells are directly affected by water usage and indirectly affected by
lack of rain. When we are careful to use only the amount of water
that we need, we help in conserving our water supply.
Responsible use of this essential
resource will result in adequate water resources for public health,
safety, and the welfare of the whole community. Conserving water
saves money, energy, and the environment.
(1) watering during
the daylight hours, night time watering reduces evaporation and allows
more water to be utilized by the plants; (2) broken sprinkler heads
How Much Water Do You Use?
| Activity |
Non-Conserving |
Conserving Activities |
| Shower (5 Minutes) |
Regular showerhead uses 30 gallons |
Low-flow showerhead/restrictor 15 gallons and
Wet-down, rinse off 4 gallons |
| Toilet Flushing |
Conventional toilet 5-7 gallons per flush |
Ultra-low flush toilet 1.6 gallons |
| Brushing Teeth |
Tap running 10 gallons |
Wet brush, rinse, one half gallon or less |
| Shaving |
Tap running 20 gallons |
Fill basin 1 gallon |
| Washing Hands |
Tap running 2 gallons or more |
Soap and rinse 1 gallon or less |
| Dishwashing |
Tap running 30 gallons |
Washing and rinse in dishpan or sink 5 gallons |
| Automatic Dishwasher |
Full cycle 15 gallons |
Short cycle 11 gallons |
| Washing Machine |
Full cycle, top water level 40 gallons |
New "tumble-action" efficient clothes washer 25
gallons |
Indoors
-
Never put
water down the drain when there may be another use for it
such as watering a plant or garden, or cleaning.
-
Verify
that your home is leak-free, because many homes have hidden
water leaks. Read your water meter before and after a
two-hour period when no water is being used. If the meter
does not read exactly the same, there is a leak.
-
Repair
dripping faucets by replacing washers. If your faucet is
dripping at the rate of one drop per second, you can expect
to waste 2,700 gallons per year which will add to the cost
of water and sewer utilities, or strain your septic system.
-
Check for
toilet tank leaks by adding food coloring to the tank. If
the toilet is leaking, color will appear within 30 minutes.
Check the toilet for worn out, corroded or bent parts. Most
replacement parts are inexpensive, readily available and
easily installed. (Flush as soon as test is done, since food
coloring may stain tank.)
-
Avoid
flushing the toilet unnecessarily. Dispose of tissues,
insects and other such waste in the trash rather than the
toilet.
-
Take
shorter showers. Replace you showerhead with an
ultra-low-flow version. Some units are available that allow
you to cut off the flow without adjusting the water
temperature knobs.
-
Use the
minimum amount of water needed for a bath by closing the
drain first and filling the tub only 1/3 full. Stopper tub
before turning water. The initial burst of cold water can be
warmed by adding hot water later.
-
Don't let
water run while shaving or washing your face. Brush your
teeth first while waiting for water to get hot, then wash or
shave after filling the basin.
-
Retrofit
all wasteful household faucets by installing aerators with
flow restrictors.
-
Operate
automatic dishwashers and clothes washers only when they are
fully loaded or properly set the water level for the size of
load you are using.
-
When
washing dishes by hand, fill one sink or basin with soapy
water. Quickly rinse under a slow-moving stream from the
faucet.
-
Store
drinking water in the refrigerator rather than letting the
tap run every time you want a cool glass of water.
-
Do not use
running water to thaw meat or other frozen foods. Defrost
food overnight in the refrigerator or by using the defrost
setting on your microwave.
-
Kitchen
sink disposals require lots of water to operate properly.
Start a compost pile as an alternate method of disposing
food waste instead of using a garbage disposal. Garbage
disposals also can add 50% to the volume of solids in a
septic tank which can lead to malfunctions and maintenance
problems.
-
Consider
installing an instant water heater on your kitchen sink so
you don't have to let the water run while it heats up. This
will reduce heating costs for your household.
-
. Insulate
your water pipes. You'll get hot water faster plus avoid
wasting water while it heats up.
-
Never
install a water-to-air heat pump or air-conditioning system.
Air-to-air models are just as efficient and do not waste
water.
-
Install
water softening systems only when necessary. Save water and
salt by running the minimum amount of regenerations
necessary to maintain water softness. Turn softeners off
while on vacation.
-
Check your
pump. If you have a well at your home, listen to see if the
pump kicks on and off while the water is not in use. If it
does, you have a leak.
-
When
adjusting water temperatures, instead of turning water flow
up, try turning it down. If the water is too hot or cold,
turn the offender down rather than increasing water flow to
balance the temperatures.
-
If the
toilet flush handle frequently sticks in the flush position,
letting water run constantly, replace or adjust it.
|
Outdoors
-
Don't over
water your lawn. As a general rule, lawns only need watering
every 5 to 7 days in the summer and every 10 to 14 days in
the winter. A hearty rain eliminates the need for watering
for as long as two weeks. Plant it smart, Xeriscape.
Xeriscape landscaping is a great way to design, install and
maintain both your plantings and irrigation system that will
save you time, money and water. For your free copy of "Plant
it Smart," an easy-to-use guide to Xeriscape landscaping,
contact your Water Management District.
-
Water
lawns during the early morning hours when temperatures and
wind speed are the lowest. This reduces losses from
evaporation.
-
Don't
water your street, driveway or sidewalk. Position your
sprinklers so that your water lands on the lawn and shrubs
... not the paved areas.
-
Install
sprinklers that are the most water-efficient for each use.
Micro and drip irrigation and soaker hoses are examples of
water-efficient methods of irrigation.
-
Regularly
check sprinkler systems and timing devices to be sure they
are operating properly. It is now the law that "anyone who
purchases and installs an automatic lawn sprinkler system
MUST install a rain sensor device or switch which will
override the irrigation cycle of the sprinkler system when
adequate rainfall has occurred." To retrofit your existing
system, contact an irrigation professional for more
information.
-
Raise the
lawn mower blade to at least three inches. A lawn cut higher
encourages grass roots to grow deeper, shades the root
system and holds soil moisture better than a closely-clipped
lawn.
-
Avoid over
fertilizing your lawn. The application of fertilizers
increases the need for water. Apply fertilizers which
contain slow-release, water-insoluble forms of nitrogen.
-
Mulch to
retain moisture in the soil. Mulching also helps to control
weeds that compete with plants for water.
-
Plant
native and/or drought-tolerant grasses, ground covers,
shrubs and trees. Once established, they do not need to be
watered as frequently and they usually will survive a dry
period without any watering. Group plans together based on
similar water needs.
-
Do not
hose down your driveway or sidewalk. Use a broom to clean
leaves and other debris from these areas. Using a hose to
clean a driveway can waste hundreds of gallons of water.
-
Outfit
your hose with a shut-off nozzle which can be adjusted down
to fine spray so that water flows only as needed. When
finished, "Turn it Off" at the faucet instead of at the
nozzle to avoid leaks.
-
Use hose
washers between spigots and water hoses to eliminate leaks.
-
Do not
leave sprinklers or hoses unattended. Your garden hoses can
pour out 600 gallons or more in only a few hours, so don't
leave the sprinkler running all day. Use a kitchen timer to
remind yourself to turn it off.
-
Check all
hoses, connectors and spigots regularly.
-
Consider
using a commercial car wash that recycles water. If you wash
your own car, park on the grass to do so.
-
Avoid the
installation of ornamental water features (such as
fountains) unless the water is recycled. Locate where there
are mineral losses due to evaporation and wind drift.
-
If you
have a swimming pool, consider a new water-saving pool
filter. A single back flushing with a traditional filter
uses from l80 to 250 gallons or more of water.
|
|